Round Bottle Labeling for Milk Tea Cups — The Ultimate Guide
Tóm tắt:Your label is your first impression. Make it count.
Your label is your first impression. Make it count.
Milk tea cups are round bottles — typically 60-90mm in diameter and 100-150mm tall. Getting labels on them fast, straight, and bubble-free isn't luck. It's engineering.
Speed & Precision: The Numbers That Matter
| Thông số | Standard Range | What It Means |
|---|---|---|
| Bottle Diameter | 25–120mm | Covers virtually every milk tea cup on the market |
| Tốc độ dán nhãn | 75 pcs/min (single), 50 pcs/min (dual) | Up to 300 pcs/min on high-end models |
| Độ chính xác | ±0.1mm to ±1mm | The difference between "homemade" and "brand-grade" |
| Sức mạnh | 220V, 0.4–2.5KW | Plug and play, no special wiring needed |
Three Rules to Kill Bubbles and Wrinkles Before They Start
Rule 1: Pressure at first contact. When the label first touches the cup, apply full pressure from edge to trailing edge. This squeezes out every pocket of air. Post-label brushing? Useless.
Rule 2: Minimize the strip-to-bottle gap. The shorter the distance between the peel plate and the cup, the less label wobble. Same goes for pre-strip distance — keep it as small as possible.
Rule 3: The bottle press head must sit 20mm lower when empty. Adjust inlet and outlet star wheels and the spiral feeder relative to the press head. Centered bottle = centered label. Every time.
The Bottom Line:
A milk tea cup travels fast on your production line. Your labeling machine better keep up — not just in speed, but in precision. ±1mm accuracy, bubble-free application, automatic fault detection. That's not a luxury. That's the baseline.
Your label tells the story before the first sip. Tell it right.
We are your exclusive labeling problem solving expert.
- Máy móc DAWEI